How Does Frost Form?

Problem

How Does Frost Form?

Materials

• 8 oz. clear plastic glass or a Pyrex-type glass measuring cup
• 1 cup of ice
• Two tablespoons water
• Paper towel
• 3 ½ tablespoons rock salt
• Spoon
• Thermometer (optional)
• Fan (optional)

Procedure

1. Take the 8 oz. plastic glass or Pyrex measuring cup, and fill it with ice. Why do you need to use a plastic or heat resistant container?
2. Add two tablespoons of water, and stir. If you have a thermometer, record the temperature.
3. Wipe the outside of the glass with the paper towel, to remove any condensation. What would this liquid be called if it was condensing outside?
4. Add 3 ½ tablespoons of rock salt. Stir for thirty seconds.
5. For the next five minutes, try scratching against the glass every thirty seconds.
6. If you have a thermometer, record the temperature.
7. Record what you see and feel.

Results

An icy layer (frost) should form on the side of the cup. It might become thicker with time.

Why?

You needed to use plastic or Pyrex cup because the large temperature changes involved in this experiment could cause a regular glass to crack or shatter. When you first added the ice to the cup, water vapor in the air might have condensed on the glass, forming “dew” on the outside of the glass. Note that this water came from the atmosphere, not the water inside the cup. Ice (solid water) normally melts at 32 F. The addition of rock salt lowers the melting point to 30 degrees F or even lower. The liquid inside your cup forming from the ice is so cold that the water vapor in the air does not form a liquid, it forms a solid. Deposition caused gas to go straight to being a solid without being a liquid first. Repeat this experiment; the amount of frost you’ll get is likely to vary depending on the humidity. HumidityIs how much moisture is in the air. On days with high humidity you are likely to get a thicker layer of frost.

Going Further

How does wind affect the formation of frost? If you have a fan, you can find out. Set up the experiment the same way you did the first time, but after you add the salt, set your cup about one yard away from the fan set at low. Compare how long it takes frost to form and how thick it is with no fan. Repeat the experiment again, this time with the fan on high.

Disclaimer and Safety Precautions

Education.com provides the Science Fair Project Ideas for informational purposes only. Education.com does not make any guarantee or representation regarding the Science Fair Project Ideas and is not responsible or liable for any loss or damage, directly or indirectly, caused by your use of such information. By accessing the Science Fair Project Ideas, you waive and renounce any claims against Education.com that arise thereof. In addition, your access to Education.com's website and Science Fair Project Ideas is covered by Education.com's Privacy Policy and site Terms of Use, which include limitations on Education.com's liability.

Warning is hereby given that not all Project Ideas are appropriate for all individuals or in all circumstances. Implementation of any Science Project Idea should be undertaken only in appropriate settings and with appropriate parental or other supervision. Reading and following the safety precautions of all materials used in a project is the sole responsibility of each individual. For further information, consult your state's handbook of Science Safety.

Create new collection

0

New Collection>

0Items

What could we do to improve Education.com?